A commercial two-digit Nixie clock board now shows real-time bus arrival countdowns instead of the time. Justin Scott reverse-engineered the STM8 microcontroller on the clock PCB using an ST-LINK V2 programmer, traced the I/O pins controlling the Nixie tubes, wrote modified firmware, and wired a serial link through a level converter to a Raspberry Pi Zero.

The Pi runs a Python script that polls a live transit API and pushes minutes-to-arrival data back to the display. Decimal point blink patterns signal background status. The hardware mod required no new circuitry beyond the level converter because spare I/O pins were already available on the STM8.

The full project log on Hackaday.io is worth reading for the pin-tracing methodology and the firmware approach, both directly applicable to any STM8-based commercial board you want to repurpose. The core problem Scott solved, getting a closed consumer PCB to accept external data, is the repeatable part.

[READ ORIGINAL →]